ADDRESS
Views: 5 Author: Site Editor Publish Time: 2023-07-18 Origin: Site
The veneer peeling machine is used for cutting a wooden section into a veneer of a certain thickness for the manufacture of plywood. It is divided into a spindle veneer peeling machine and a spindle-less veneer peeling machine;
There is a spindle veneer peeling machine for short, that is, the two ends of the wood are stuck with the chuck to perform the rotary cutting. The diameter of the chuck is generally about 100mm, which will result in the wood core within 100mm cannot be effectively utilized. Increasingly tight, these wood cores are very impressive; thus developing a rotary cutting machine without a chuck that cuts the remaining wood core - spindle-less veneer peeling machine, spindle-less veneer peeling machine is mainly used for rotary cutting diameter Wood or card with the remaining wood core, the advantage is the high utilization of wood, compared with the spindle has many disadvantages, such as poor precision, high failure rate and so on.
The price is very different according to different manufacturers, different grades, such as 8 feet of card, Japan's about 1 million US dollars, domestic prices from 100000 yuan to 500,000 yuan, generally can be cut 4mm- 0.03mm, width is 2700mm-900mm, accuracy is within 0.05mm, spindle-less is 0.1-0.2mm.
Shandong Jinlun Machinery Manufacturing Co., Ltd. specializes in the production of rotary cutting machine for more than 30 years!