You are here: Home / News / Reasonable adjustment of veneer peeling machine parts

Contact

ADDRESS

 No.58 Volvo Road Economic Development Area,Linyi City,China
 

E-MAIL
 info@plymachine.com

 

TELEPHONE

  +86-539-6017997 6017977
 +86-539-6017787

Reasonable adjustment of veneer peeling machine parts

Views: 2     Author: Site Editor     Publish Time: 2022-02-11      Origin: Site

The manufacturer of the veneer peeling machine said that we cannot just use the veneer peeling machine without paying attention to its adjustment and maintenance. After the machine has been used for a long time, there will inevitably be some small problems, which need to be solved in time.

If it is a new veneer peeling machine, after a few days of use, the dovetail clearance should be checked. If the clearance is found, it should be adjusted in time. When adjusting, first loosen the dovetail fixing bolt slightly, turn the dovetail adjustment bolt inward to an appropriate clearance, and then tighten the dovetail. Fixing bolts. After the blade is used for a period of time, the wear of the blade edge will seriously affect the quality of the board skin, and the blade needs to be disassembled and ground with a plane sharpener. For each sliding and rotating part, keep lubricated at all times, and the grease nipple is regularly filled with butter.

On the other hand, it is necessary to regularly check the tightening of the bolts of various parts of the veneer peeling machine, and tighten them in time to ensure the quality of the plate and prolong the service life of the machine.


CONTACT US

 Company: Shandong Jinlun Machinery Co,Ltd. 
 Tel: +86-539-6017977
 Fax: +86-539-6017787
 Email: info@plymachine.com
 Address: No.58 Volvo Road Economic Development Area,Linyi City,China
INQUIRY

PRODUCT CATEGORY

 Copyright © 2023 Shandong Jinlun Machinery Manufacturing Co,Ltd.    All Rights Reserved