-
CuttingRaw material handling and final product processing all require cutting processes such as veneer peeling, planing, wood chips, wood shavings, fiber grinding and separation, sawing, sanding and the like in the final machining. Cutting wood into differently shaped elements and reassembling them
-
log debarker（log debarker machine):log debarker, also known as log debarking machine, belonging to one of wood processing machinery products.log debarker, that is, the wood mounted on the peeling machine, start the machine, so that the stripping of the skin can be stripped of the logs, peeling rate
-
Now the economy is in constant development, especially in the heavy industry, the use of peeling machine manufacturers products can promote economic.....
-
Veneer peeling machine used in the process of most of the accidents are due to failure to comply with safety practices caused, but the very important rules are: veneer peeling machine in operation do not wipe, lubricate, maintenance of the machine; repair veneer peeling machine must cut off the powe
-
Our machines can peel the following types of wood:•Soft Wood: Bintagor, Gerutu, Kembang, Mersawa, etc.•Hard Wood: Eucalyptus, Keruing, Kapor, Mango, Makore, Ocume, Nyatoh, etc.•Plantation Wood: Poplar, Eucalyptus, Simbal, Rubberwood, Oak, NZ Pine, Falcata, Albizia, etc.Quality high-quality wood spin
-
The latest CNC rotary cutting equipment not only improves the quality and precision of veneer production, but also improves the production efficiency and the degree of automation of the whole machine.
-
Veneer laminate (LVL) is a kind of wood structural material obtained by peeling thick veneer, gluing, parallel grain blank, pressure gluing. Different from plywood, veneer laminating timber veneer all parallel grain blanks, it is also called parallel plywood, the number of layers can reach more than
-
A typical plywood panel has face veneers of a higher grade than the core veneers. The principal function of the core layers is to increase the separation between the outer layers where the bending stresses are highest, thus increasing the panel's resistance to bending. As a result, thicker panels ca
-
Woodex is Russia's leading international industry event where well-known manufacturers and suppliers demonstrate their latest equipment and technologies for woodworking, furniture production and wood waste utilisation. The exhibition is held biennially. In 2017, Woodex presented more than 372 companies from 30 countries, with 5 national stands from Italy, Germany, Spain, Turkey and China. Woodex is supported by the European Federation of Woodworking Machinery Manufactures (EUMABOIS), Ministry of Natural Resources and Environment of the Russian Federation, Federal Forestry Agency, The Government of Moscow, the Chamber of Commerce and Industry of the Russian Federation, and the Ministry of Industry and Trade of the Russian Federation.
-
Recently, the general office of the provincial government issued a three-year action plan for the development of straw based panel industry in shandong province (2019-2021)."The plan" put forward by the end of 2021, in yantai, heze, Texas, binzhou, linyi municipal construction no aldehyde and relate
