You are here: Home / News / How to debug the pressure value of the peeling machine

Contact

ADDRESS

 No.58 Volvo Road Economic Development Area,Linyi City,China
 

E-MAIL
 info@plymachine.com

 

TELEPHONE

  +86-539-6017997 6017977
 +86-539-6017787

How to debug the pressure value of the peeling machine

Views:0     Author:Site Editor     Publish Time: 2021-12-28      Origin:Site

The machine of the rotary cutting machine manufacturer is an important mechanical equipment for wood processing, which can not only improve work efficiency and save labor.

During production, the pressure of the rotary cutting machine is adjusted according to a certain thickness standard, but in many cases when the rotary cutting machine is specifically used, it is also necessary to use a triangle ruler to lean against the upper and inner sides of the double roll. Use a straightedge against the top of the single roll, and observe the value at the junction of the lower edge of the triangle and the ruler. When the thickness of the leather is 1.0mm-2.0mm, take 35mm-36mm. For example, when the thickness of the leather is less than 1.0mm, read The value should be increased accordingly. If the thickness of the leather is greater than 2.0mm, the reading value should be reduced accordingly.

When the pressure increases, shims should be added between the single box and the knife shoulder on both sides, and when the pressure is reduced, it is necessary to reduce the shims.


CONTACT US

 Company: Shandong Jinlun Machinery Co,Ltd. 
 Tel: +86-539-6017977
 Fax: +86-539-6017787
 Email: info@plymachine.com
 Address: No.58 Volvo Road Economic Development Area,Linyi City,China
INQUIRY
 Copyright © 2017 Shandong Jinlun Machinery Manufacturing Co,Ltd.    All Rights Reserved     Support By Leadong