Views: 9 Author: Site Editor Publish Time: 2023-12-13 Origin: Site
The following points should be mastered when selecting:
1.The splint has the difference between the front and the back. When selecting, the plywood should be clear in wood grain, smooth and smooth on the front, not rough, and should be flat.
2.Plywood should not be damaged, broken, insects, nail holes, dead knots, burrs and other defects.
3.The plywood has no degumming phenomenon;
4.Some plywood is made up of two different kinds of veneer glue sticks together, so pay attention to the selection when the joints are tight, no unevenness. In particular, there should be no two different lines on a plywood board, otherwise it will hinder reasonable use, resulting in waste and affecting the appearance of furniture.
5.When selecting a splint, care should be taken to select a splint that does not disperse. You can use a wooden stick of about 50cm to gently pry the plywood to the various parts. The sound is well-proportioned and crisp. It is basically the inner plate. If the sound of the "shell" is sounded, it is probably due to degumming or bubbling. The inherent quality problems caused. This type of board can only be used as a lining plate or a top plate and cannot be used as a fabric.
6.When choosing a splint, pay attention to the color of the wood and the color of the furniture paint.