Plywood Core Veneer Roller Dryer Machine for Core Veneer

    decks are roller drying .The machine requires less investment and takes small space.

    It also can be changed as upper and middle   decks are continuous mesh drying, lower 

    deck is roller drying.

    The dryer machine is 11 sections as a standard, 2 meters as a standard for one

    heating section, one cooling section, one conveying system, one input roller table,

    and one output roller table. Customers can use the machine from 5 sections to 15

    sections that it is up to your needs.

Plywood refers to that logs are spined into veneer by peeling machine , and then glued according

 to the veneer fiber direction which is arranged perpendicularly, and finally pressed into a wood-based panel. Plywood is the ideal product widely used in all kinds of furniture, office supplies, 

combination speaker, packaging exhibition and other industries. Main sections of plywood 

production line include peeling section, veneer drying section, gluing section, pre-press section, 

hot press section, saw edge section, sanding section...etc. The thickness range of plywood is 

generally the 8-18mm, board width is generally 915-1220mm. We can design and manufacture 

any size according to users' requirements.