The Core Veneer Dryer Line for The Plywood Production Line
Product Description
The core veneer dryer line for the plywood production line
Product description:
Veneer dryer: The upper deck is continuous mesh drying and the middle and lower
decks are roller drying .The machine requires less investment and takes small space.
It also can be changed as upper and middle decks are continuous mesh drying, lower
deck is roller drying.
The dryer machine is 11 sections as a standard, 2 meters as a standard for one
heating section, one cooling section, one conveying system, one input roller table,
and one output roller table. Customers can use the machine from 5 sections to 15
sections that it is up to your needs.
Plywood refers to that logs are spined into veneer by peeling machine , and then glued according
to the veneer fiber direction which is arranged perpendicularly, and finally pressed into a wood-based panel. Plywood is the ideal product widely used in all kinds of furniture, office supplies,
combination speaker, packaging exhibition and other industries. Main sections of plywood
production line include peeling section, veneer drying section, gluing section, pre-press section,
hot press section, saw edge section, sanding section...etc. The thickness range of plywood is
generally the 8-18mm, board width is generally 915-1220mm. We can design and manufacture
any size according to users' requirements.
| whole length | 30 m |
| working width | 2.8 m |
| veneer thickness | 0.20-1.00 mm |
| Working layers | 2 layers |
| Veneer output speed | about 20-30 CBM per 12 hours |
| Initial moisture | 40%-60% |
| Final moisture | < 12 % |
| Power of heating motor | 4 KW*2sets |
| Power of conveyor motor | 5.5 KW*2sets |
| Fuel | bark and other tree waste |
Our after-sale service:
Pre-sale services:
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
We are the manufacturer of plywood machine from China . All of our products are with CE approval and special design according to customer's requirement is available.
More details please contact me .