Short Cycle Melamine Hot Press Machine for The Plywood Film Face Veneer
Product Description
Latest 1200T short cycle hot press machine for facing melamine pepAr plywood. It takes only 10-30 seconds to facing the melamine paper to the plywood core.
structural Features of Hot Press Machine
1. Heating Platen
The heating platen is made from a carbon steel plate with drilled holes for strength and durability. A working table of 2700mm*1370mm allows users to easily operate the wood working machine.
2. Heating System
The hot press comes with a special heating system which employs a heat transference oil boiler that features a counter current flow and a high temperature, and lowers the system pressure to meet safety requirements. The heat system's closed circulation transfers energy via liquid, thus reducing heat loss and saving overall energy.
3. Hydraulic System
This type of hot press is a hydraulic plywood press with adjustable hydraulic pressure.
4. Oil Cylinder
The oil cylinder is made with high precision tools, and sealants prevent oil from leaking.
5. Control System
Our hot press is equipped with a microcomputer control system for both manual and automatic control. With a simple push of a button you can control a whole set of processes including pressing plate ascending, closing, pressure adding, pressure maintaining, timing and pressing plate descending.
| SPECIFICATIONS FOR SHORT CYCLE HOT PRESS MACHINE | |||
| Type | 6*9 Feet | 4*8 Feet | 4*8 Feet |
| Total pressure (T) | 1800T | 1600T | 1200 T |
| Into board direction | Crosswise | Crosswise | Crosswise |
| Number of layers | Single layer | Single layer | Single layer |
| Layer-to-layer spacing | 200MM | 200MM | 200MM |
| Hot pressing plate number | 2 | 2 | 2 |
| Breadth size | 2900*2000*140mm 2900*2000*120mm | 2600*1400*140mm 2600*1400*100mm | 2600*1400*140mm 2600*1400*100mm |
| Plunger cylinder number | 9 | 6 | 6 |
| Diameter | 320mm(WUXI) | 360mm(WUXI) | 320mm(WUXI) |
| Stroke | 200MM | 200MM | 200MM |
| Resistance to pressure | ≤25Mpa | ≤25Mpa | ≤25Mpa |
| No-load closing time | 5s | 5s | 5s |
| Low-pressure pump flow | 320ml/r | 320ml/r | 320ml/r |
| Power | 22kw | 18.5kw | 18.5kw |
| Control mode | Automatic station | Automatic station | Automatic station |
| Frame form | Skeleton type | Skeleton type | Skeleton type |
| Fluctuation beam | 900mm | 900mm | 900mm |
| Thickness of steel pipe | 50mm,30mm,20mm | 50mm,30mm,20mm | 45mm,30mm,20mm |
| Stand column | 400mm | 400mm | 400mm |
| Voltage | 380V | 380V | 380V |
| Weight | 48T | 38T | 32T |