How to debug the pressure value of the peeling machine

The machine of the rotary cutting machine manufacturer is an important mechanical equipment for wood processing, which can not only improve work efficiency and save labor.

During production, the pressure of the rotary cutting machine is adjusted according to a certain thickness standard, but in many cases when the rotary cutting machine is specifically used, it is also necessary to use a triangle ruler to lean against the upper and inner sides of the double roll. Use a straightedge against the top of the single roll, and observe the value at the junction of the lower edge of the triangle and the ruler. When the thickness of the leather is 1.0mm-2.0mm, take 35mm-36mm. For example, when the thickness of the leather is less than 1.0mm, read The value should be increased accordingly. If the thickness of the leather is greater than 2.0mm, the reading value should be reduced accordingly.

When the pressure increases, shims should be added between the single box and the knife shoulder on both sides, and when the pressure is reduced, it is necessary to reduce the shims.