8 Feet Peeling Lathe for Plywood
Product Description
8 feet plywood machine for veneer peeling
Product description
The rotary tangent is one of the main production lines of plywood. It is composed of conveying equipment, round machines, rotary cutting machines and palletizing machines. Among them, the rotary cutting machine(veneer peeling machine)is the most important part.
Spindle-less veneer peeling machine
INTRODUCTION
Above these pictures, the fourth is vertical blade adapter. This part can be ajusted.In other words, if it is a 8 feet peeling machine,you can use it to make the 4ft and 8ft venner both.
In the fifth picture, it is called as piano type protective cover. It is used for the protection of oil in the tank.
TIPS:
1, IN THE FIRST PICTURE.
They are air cylinder, their motivation is the pneumatic pump.
Both sides of the cylinder, adjust the wood in between single and double roller to the appropriate position.
The top of the cylinder cuts off the remaining wood core.
This arrangement reduces manpower operation and improves efficiency
2,IN THE SECOND PICTURE
They are rollers and screw.
The rollers have two types, Regular and holding-on. The latest has more lager power between the rollers.
And the work mode of the screw has changed too. It takes the way of pushing forward,that is more convenient than the traditional way. The screw also is covered by a protective steel container. About 10 days, you need feed into new oil.
Finally, you can see two tanks, where have enough oil and the body of the cutter holder can move easy.
3,IN THE THIRD PICTURE
These are oil pipe, they conecct with the oil box and the other hydro-cylinder,
that is installed in the cutter holder. Once the machine works, the scalpel pressing plate will press the knife more heavier.The new way makes the Loading and unloading knife more convenient.
4,IN THE FORTH PICTURE
It is servo motor and has high precision. It is used for the automatic thickness change.Our services
The rotary tangent is one of the main production lines of plywood. It is composed of conveying equipment, round machines, rotary cutting machines and palletizing machines. Among them, the rotary cutting machine(veneer peeling machine)is the most important part.
Spindle-less veneer peeling machine
TECHNICAL PARAMETER | ||
Main index | WWXQ260SY | |
Max. log length | 2600mm | |
Max. log diameter | 500mm | |
Veneer thickness | 1.0-3.0mm | |
Speed | 40-47m/min | |
Power | 56.6kw | |
Dimension | 5500x2200x1700mm | |
Weight | About 11700kg | |
Automatic thickness change | YES | |
Hydraulic knife changing | YES | |
Note: Speciaal design according to customer's requirement is available. |
INTRODUCTION
Above these pictures, the fourth is vertical blade adapter. This part can be ajusted.In other words, if it is a 8 feet peeling machine,you can use it to make the 4ft and 8ft venner both.
In the fifth picture, it is called as piano type protective cover. It is used for the protection of oil in the tank.
TIPS:
1, IN THE FIRST PICTURE.
They are air cylinder, their motivation is the pneumatic pump.
Both sides of the cylinder, adjust the wood in between single and double roller to the appropriate position.
The top of the cylinder cuts off the remaining wood core.
This arrangement reduces manpower operation and improves efficiency
2,IN THE SECOND PICTURE
They are rollers and screw.
The rollers have two types, Regular and holding-on. The latest has more lager power between the rollers.
And the work mode of the screw has changed too. It takes the way of pushing forward,that is more convenient than the traditional way. The screw also is covered by a protective steel container. About 10 days, you need feed into new oil.
Finally, you can see two tanks, where have enough oil and the body of the cutter holder can move easy.
3,IN THE THIRD PICTURE
These are oil pipe, they conecct with the oil box and the other hydro-cylinder,
that is installed in the cutter holder. Once the machine works, the scalpel pressing plate will press the knife more heavier.The new way makes the Loading and unloading knife more convenient.
4,IN THE FORTH PICTURE
It is servo motor and has high precision. It is used for the automatic thickness change.
Meanwhile, the distribution box is made correspondent to the related machine in the time of the prepare of sales.
Other information
A. Servo motor, high precision, control cutter adjustment (adjust knife seam refers to the distance between the single roller and blade), slit control single board thickness.
B. The rolling cutter seat is arranged above the rubber roller and is positioned on the same frame as a whole. Place the cutter seat first, then place the hob holder.
C. A part of the hob holder is to place the blade
D. Combination deceleration motor (first) + motor (after)
E. Rubber covered roller is under the blade."The board" role. The hob holder is used to fix the blade.
F. Between the cutter holder and hold(ing)-down clip fix blade knife, the veneer seat out from a single gap between the roller and the knife body. Cut the blade on the hob holder. When cutting, roll the cutter holder and the rubber roller to rotate, and the cutter body does not move.
If have any question about the machine, Welcome contact the salesman anytime Other information
A. Servo motor, high precision, control cutter adjustment (adjust knife seam refers to the distance between the single roller and blade), slit control single board thickness.
B. The rolling cutter seat is arranged above the rubber roller and is positioned on the same frame as a whole. Place the cutter seat first, then place the hob holder.
C. A part of the hob holder is to place the blade
D. Combination deceleration motor (first) + motor (after)
E. Rubber covered roller is under the blade."The board" role. The hob holder is used to fix the blade.
F. Between the cutter holder and hold(ing)-down clip fix blade knife, the veneer seat out from a single gap between the roller and the knife body. Cut the blade on the hob holder. When cutting, roll the cutter holder and the rubber roller to rotate, and the cutter body does not move.