The 1200 T 4*8 Short Cycle Melamine for Sticking Face Veneer
Product Description
Hot sale 1200 T 4*8 short cycle melamine hot press machine
Product Description:
1. Framework adopt high quality steel, heighten and thicken, solid and durable.
2. New model high grade pump station, lower noise, more stable performance.
3. Adopting new model four-bar linkage synchronizer, synchronous effect more stable.
4. Cylinders adopt high temperature resistance oil seal and macromolecule heat insulation board
5. All adopt high grade electrical appliance and hydraulic parts, very low failure rate.
6. Professional custom 4*8ft, 6*8ft, and 6*12ft short cycle melamine laminate hot press and production line.
| SPECIFICATIONS FOR SHORT CYCLE HOT PRESS MACHINE | |||
| Type | 6*9 Feet | 4*8 Feet | 4*8 Feet |
| Total pressure (T) | 1800T | 1600T | 1200 T |
| Into board direction | Crosswise | Crosswise | Crosswise |
| Number of layers | Single layer | Single layer | Single layer |
| Layer-to-layer spacing | 200MM | 200MM | 200MM |
| Hot pressing plate number | 2 | 2 | 2 |
| Breadth size | 2900*2000*140mm 2900*2000*120mm | 2600*1400*140mm 2600*1400*100mm | 2600*1400*140mm 2600*1400*100mm |
| Plunger cylinder number | 9 | 6 | 6 |
| Diameter | 320mm(WUXI) | 360mm(WUXI) | 320mm(WUXI) |
| Stroke | 200MM | 200MM | 200MM |
| Resistance to pressure | ≤25Mpa | ≤25Mpa | ≤25Mpa |
| No-load closing time | 5s | 5s | 5s |
| Low-pressure pump flow | 320ml/r | 320ml/r | 320ml/r |
| Power | 22kw | 18.5kw | 18.5kw |
| Control mode | Automatic station | Automatic station | Automatic station |
| Frame form | Skeleton type | Skeleton type | Skeleton type |
| Fluctuation beam | 900mm | 900mm | 900mm |
| Thickness of steel pipe | 50mm,30mm,20mm | 50mm,30mm,20mm | 45mm,30mm,20mm |
| Stand column | 400mm | 400mm | 400mm |
| Voltage | 380V | 380V | 380V |
| Weight | 48T | 38T | 32T |
After-sale service:
Pre-sale services:
1) Provide the free consultation of the equipment
2) Provide the standard device and the flow chart
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
We are the manufacturer of plywood machine from China . All of our products are with CE approval and special design according to customer's requirement is available.
More details please contact me .